WiFi Shield

$ 149.99

Important Notes

  • Compatible with the existing Cyton (32bit) (8-16 channel) and Ganglion (4 channel) biosensing boards.
  • Does not include a Ganglion, Cyton or electrodes. 
  • For more detailed information on how to get started with the WiFi Shield, check out the WiFi Shield Getting Started Guide on our Learning Pages.
  • The WiFi Shield currently only supports WPA level security. Enterprise (WPA2 PEAP) support coming in mid to late 2018. You may use WiFi Direct to go direct from WiFI Shield to Computer or use a router or a hotspot to create your own personal WiFi network in places that only have Enterprise grade security.

WiFi Shield Overview

The OpenBCI WiFi Shield is a plug and play accessory board for the Cyton and Ganglion devices. The WiFi Shield is the first open-source device that connects bio-sensors directly to the internet, allowing you to easily bypass latency filled serial ports and low range bluetooth connections. Further, the wifi shield enables you to stream faster and farther than possible with the default bluetooth based hardware. On most Wireless networks, the WiFi Shield can stream well at 1000Hz with the Cyton and Daisy boards and at 1600Hz with the Ganglion board. With a high speed network switch, sample rates over 2000Hz are possible with a theoretical limit of 16000Hz for the Cyton, 8000Hz for the Cyton with Daisy shield, and 12800Hz for the Ganglion. The WiFi Shield is a breeze to update over the air and it will continue to get faster. Every WiFi Shield is uniquely addressable on a local area network, allowing for the first time, a single computer to control a fleet of devices by quickly connecting to and commanding WiFi shields to start streaming! The WiFi Shield allows you to use popular messaging protocols such as MQTT to stream JSON or Raw data directly to cloud services like Cloudbrain, Amazon Web Services IoT, Microsoft Azure IoT or Google Cloud IoT.

The WiFi Shield has a ESP8266 on-board microcontroller and wireless connection. The ESP8266 is Expressif’s first generation Arduino-compatible IoT Wifi module. The Esp8266 allows for the ability to update software over the air (OTA). Every WiFi Shield will be pre-programmed with versatile firmware so you can get started sensing your body right out of the box. The WiFi Shield takes two GPIO pins from the Cyton/Ganglion for proper operation. All of break-out inputs on the Ganglion and Cyton are available for you to hack with.

What  comes inside the box?

  • (x1) WiFi Shield
  • (x1) Battery Pack
  • (x1) Spudger

WiFi Shield Technical Specifications

WiFi Shield:

  • Power with 3.3V to 6V DC battery ONLY
  • Current Draw: 125mA when idle, 150mA connected and streaming data
  • ESP8266 Wifi Module
  • Board Dimensions 2.41” x 2.41” (octogon has 1” edges)
  • Switches to manually connect/disconnect power rail to carrier board. 


The WiFi Shield is not a medical device nor is it intended for medical diagnosis and provided to you "as is," and we make no express or implied warranties whatsoever with respect to its functionality, operability, or use, including, without limitation, any implied warranties, fitness for a particular purpose, or infringement. We expressly disclaim any liability whatsoever for any direct, indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility of such damages. 

Evaluation Board/Kit Important Notice: OpenBCI, Inc. provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by OpenBCI, Inc. to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Refund Policy here


More from this collection



Sold Out